As most of you having FOUR MAGNUMS we really don't do a lot of mods and in fact, I pretty much like my SRT as it is and my R/T only has subtle mods... but a while back at the Georgia Shindig I got a great deal BECAUSE I was buying FOUR ABS covers.

I put ONE each on Tee's R/T, her SXT and on my R/T but I had some issues with the SRT as I had an underhood switch and a controller for my grill strobe lights in the way. Then I had the fuse mount bracket for my Big Bully Catch Can, so after thinking about these for the past couple of weeks had an idea of how I thought I'd concour this!

This picture shows where I started moving stuff...
http://i266.photobucket.com/albums/ii247/deboyacej/DSCN1018.jpg

This is the Catch can mount and the controller for my grill strobe lights that I had to move out of the way to mount the ABS cover...
http://i266.photobucket.com/albums/ii247/deboyacej/DSCN1019.jpg

This is a picture of a test fit of the cover and sitting the catch can to check for clearance and mounting ideas...
http://i266.photobucket.com/albums/ii247/deboyacej/DSCN1020.jpg

Next I lined up the catch can to mount top even with ABS cover and drilled the hole for mounting....
http://i266.photobucket.com/albums/ii247/deboyacej/DSCN1021.jpg

Then I took the catch can apart and mounted the top to the ABS cover for a test fit and insure the top lined up with the cover... Mounted through the back side 'cuz I eliminated the fuse box mount....
http://i266.photobucket.com/albums/ii247/deboyacej/DSCN1022.jpg

Then turned it over and looked to see if mount looked OK and sturdy...
http://i266.photobucket.com/albums/ii247/deboyacej/DSCN1023.jpg

Looks OK, I think, so I screwed on the bottom of the can...
http://i266.photobucket.com/albums/ii247/deboyacej/DSCN1025.jpg

More Pictures......

Yup, I thing it'll be fine mounted to the ABS cover.... I like the way it came out....
http://i266.photobucket.com/albums/ii247/deboyacej/DSCN1026.jpg

Now to sit it down in the engine bay and check for all clearance issues.... looks like no problems...
http://i266.photobucket.com/albums/ii247/deboyacej/DSCN1027.jpg

So now I start putting 'er back together.............
http://i266.photobucket.com/albums/ii247/deboyacej/DSCN1028.jpg

Now I mount my controller for my grill strobe lights....
http://i266.photobucket.com/albums/ii247/deboyacej/DSCN1029.jpg

Power up the strobes and insure controller lights up and lights are working....
http://i266.photobucket.com/albums/ii247/deboyacej/DSCN1030.jpg

Yup see controller is blinking between green and red... seems to be working ok ~ Now, I check my alarm system to insure I didn't knock anything loose and insure it's working OK ~ Yup, she works!!!

http://i266.photobucket.com/albums/ii247/deboyacej/DSCN1031.jpg



NOW, I go over to my R/T to compare the ABS cover that I put onto that one a couple of weeks ago. Guess they look pretty much the same....
http://i266.photobucket.com/albums/ii247/deboyacej/DSCN1034-1.jpg

Way to go Jim! That looks great!!

way to go!!thanks for sharing...

You did a great job! Looks awesome!:smileup:





Joe

Nice Jim! I need one of those.